Silviculture is the practice of controlling the establishment, growth, composition, health, and quality of forests to meet diverse needs and values. The name comes from the Latin silvi- (forest) + culture (as in growing). The study of forests and woods is termed silvology.
Clearcutting--Clearcutting, or clearfelling, is a harvest method that removes essentially all the standing trees in a selected area. Depending on management objectives, a clearcut may or may not have reserve trees left to attain goals other than regeneration, including wildlife habitat management, mitigation of potential erosion or water quality concerns. Silviculture objectives for clearcutting, (for example, healthy regeneration of new trees on the site) and a focus on forestry distinguish it from deforestation.
Logging methods
The Washington Iron Works Skidder in Nuniong is the only one of its kind in Australia, with donkey engine, spars and cables still rigged for work.The above operations can be carried out by different methods, of which the following three are considered industrial methods:
Tree-length logging--Trees are felled and then delimbed and topped at the stump. The log is then transported to the landing, where it is bucked and loaded on a truck. This leaves the slash (and the nutrients it contains) in the cut area where it must be further treated if wildland fires are of concern.
Full-tree logging
Horse logging in PolandTrees and plants are felled and transported to the roadside with top and limbs intact. The trees are then delimbed, topped, and bucked at the landing. This method requires that slash be treated at the landing. In areas with access to cogeneration facilities, the slash can be chipped and used for the production of clean electricity or heat. Full-tree harvesting also refers to utilization of the entire tree including branches and tops.] This technique removes both nutrients and soil cover from the site and so can be harmful to the long term health of the area if no further action is taken, however, depending on the species, many of the limbs are often broken off in handling so the end result may not be as different from tree-length logging as it might seem.
Cut-to-length logging
Modern excavator fit up with forestry attachmentCut-to-length logging is the process of felling, delimbing, bucking and sorting (pulpwood, sawlog, etc.) at the stump area, leaving limbs and tops in the forest. Harvesters fell the tree, delimb and buck it, and place the resulting logs in bunks to be brought to the landing by a skidder or forwarder. This method is usable for smaller timber on ground flat enough that forwarders can operate, but does not work well on steep slopes.